Zaribo QLINK z-stepper motor- Detachable Cables
High-Quality Stepper Motor with connector and detachable cable (cable included), Quick Link technology. Latest version of the motor by LDO.
Comes with 320mm integrated lead screw and POM nut.
14awg Silicone Cable Red & Black 2x1.5m
Pack contains 1.5m red and 1.5m black 14AWG cable.
Length is sufficient for wiring PSU to Einsy or Rambo box on Zaribo frame.
Terminal Block Male Female Kit for Rambo Mini Burned...
Pluggable terminal block. 15A, 30...12AWG
Stepper Motor Kit Zaribo 420
2x motors with 520 lead screws, 3x motors for x,y,e. All motors by LDO.
Sunon 5V 40mm x 40mm fan with 25cm cable
Sunon fans come with 25cm cable. This version has NO plug
IR Filament Sensor Kit for Zaribo Prusa 3D Printers
MK3s including sensor, cable, steel ball, magnets, screws
Zaribo Extruder Motor by LDO
New motor design. Extruder Motor stays much cooler during printing.
SKR Conversion Cables for Zaribo Prusa 3D Printers
135mm Dupont to JST Conversion Extension Cables
Sunon 5V 40mm x 40mm fan with 65cm cable + connector
Sunon fans come with 65cm cable and with the necessary connector.
Zaribo 220 Z Axis Stepper Motor (Prusa MK2 MK3 Compatible)
Lead screw integrated z-axis motor for Zaribo 220 or stock Prusa MK2(S), MK3.
Genuine Einsy Rambo 1.2b by Ultimachine
This is Einsy Rambo 1.2b. The Einsy Rambo board is an all in one 3D printer motherboard. It is a compact version of our RAMBo v1.3L design with the Arduino MEGA and stepper drivers all on one integrated PCB.
Home
Zaribo 220 Z Axis Stepper Motor (Prusa MK2 MK3 Compatible)
Lead screw integrated z-axis motor for Zaribo 220 or stock Prusa MK2(S), MK3.
Prusa MK2, MK2.5(s), MK3(s) to Zaribo 320 Upgrade Kit
Print height of 320mm. Shipment in ~2 weeks
- Prusa MK2 -> Zaribo MK2
- Prusa MK2.5(s) -> Zaribo 2.5(s)
- Prusa MK3(s) -> Zaribo MK3(s)
Set of 10 x LMU8 Linear Bearing | Bushing by Misumi
Set of LMU8 Linear Bearings by Misumi. 10 pieces for one Prusa MKx / Zaribo MKx
WAGO Terminal Set
Solid, stranded and fine-stranded conductors with different cross sections can be connected. In Zaribo it's used in the Rambo-box. Package contains 4 terminals.
Zaribo 220 MK3s Rel 3
Currently there is a 3-4 week lead time for all combinations for new orders!
Assembled Zaribo 220 MK3s Rel 3
Misumi Hidden Corner L-Brackets for 3030 Aluminium...
Misumi L-bracket (needed for fastening the z-axis extrusions)
SKR Conversion Cables for Zaribo Prusa 3D Printers
135mm Dupont to JST Conversion Extension Cables
Stepper Motor Kit Zaribo 420
2x motors with 520 lead screws, 3x motors for x,y,e. All motors by LDO.
Genuine Einsy Rambo 1.2b by Ultimachine
This is Einsy Rambo 1.2b. The Einsy Rambo board is an all in one 3D printer motherboard. It is a compact version of our RAMBo v1.3L design with the Arduino MEGA and stepper drivers all on one integrated PCB.
SuperLube Grease for Bearings, Bushings and Rods by...
3oz - 85g. Synthetic grease with SYNCOLON® PTFE
Vanadium Nozzle
Lifetime warranty against abrasion
Wear resistant, plastic repellent coating
High speed steel, hardened and tempered to 64 Rockwell C.
Available in multiple orifice sizes
25 x Square Nuts High Quality DIN 562 Stainless Steel
DIN 562, M3, 1.7mm thick
Stainless Steel
Pack of 25