Slim Fanless PSU LRS-250 Switching Power Supply 24V 250W for 3D Printers

£25.00
Tax included

110v - 220v

Quantity
In Stock

 

Privacy Policy

 

Delivery Policy

 

Terms and Conditions

MODEL LRS-250-24
OUTPUT
DC voltage 24V
Rated output current 10.42A
Output current range 0~10.42A
DC power 250W
Voltage adj.range ±10%
Voltage tolerance ±1%
Ripple and noise 100mVp-p
Line Regulation ±0.5%
Load stability ±0.5%
INPUT
AC voltage range 85~132VAC/170~264VAC selected by switch 47~63Hz
Current 4A/115V 2.2A/230V
Efficiency 86%
AC Inrush current Cold-start current 60A/115V 60A/230V
Leakage current <2mA/240VAC
PROTECTION
Overload
110 ~ 150% rated output power
Protection type: Constant current limiting, recovers automatically after fault condition is removed
Over-voltage
Protection type: Shut down o/p voltage, re-power on to recover
5.75-6.9V 13.8-16.2V 28.8-33.6V 41.4-48.6V 55.2-64.8V
Short Citcuit Protection type: Shut off
SAFYE
Setup rise hold up time 200ms,100ms,20ms
Vibration 10~500Hz,2G 10min./1cycle,Period for 60min,EACH AXES
Withstand voltage Input and output interval,1.5KVAC,Input and enclosure,1.5KVAC,Output and enclosure,0.5KVAC
Isolation resistance Input and output interval,Input and enclosure,Output and enclosure,500VAC/100MΩ
ENVIRONMENT
Temperature coefficient ±0.03%/°C (0~50°C )
Working temperature and humidity -20~+60°C,20~90%RH
Store temperature and humidity -40°C~+85°C,10~95%RH
OTHER
Overall dimension 215*115*30mm 48pcs/Carton ( common packing )
Weight 0.6Kg
CERTIFICATE
CE EMC Authenticate
EN55022:2010 EN61000-3-2:2006+AL:2009 EN61000-3-3:2008
EN55024:2010 EN55015:2006+AL2007+2009 EN61547:2009
CE LVD Authenticate
EN61347-1:2008T A1:2001 EN61347-2-13:2006
EN60950-1:2006+A11:2009+A1:2010+A12:2001
ROHS Authenticate
EPA3050B:1996 EN1122B:2001 EPA3052:1996 EPA3060A:1996
EPA7196A:1992 EPA3540C:1996 EPA8270D:2007 IEC62321:2008
China

Specific References

9 other products in the same category: