Prusa MK2, MK2.5(s), MK3(s) to Zaribo 320 Upgrade Kit

Reference:

$323.52

Print height 320mm

Prusa MK2 -> Zaribo MK2

Prusa MK2.5(s) -> Zaribo 2.5(s)

Prusa MK3(s) -> Zaribo MK3(s) 

Printed parts only available for MK3 Rel. 3. STLs for MK2, MK2.5 are available on github.

Printed parts
Rod Diameter
Quantity
In Stock!

 

Security Policy

 

Delivery Policy

 

Return Policy

Please allow up to 10 days before shipping when you order plastic parts.

A 186 page assembly Manual for Rel 3. is only available in English! Please download here: https://zaribo.com/blog/zaribo-build-guide-pdf/

This kit allows many different upgrade options:

Prusa MK2 -> Zaribo MK2

Prusa MK2.5(s) -> Zaribo 2.5(s)

Prusa MK3(s) -> Zaribo MK3(s) 

Zaribo 320 upgrade kit contains:

- Misumi extrusions for frame
- Misumi smooth rods for y-axis
- Misumi smooth rods for z-axis
- Misumi T-nuts
- Misumi metal corner brackets
- Misumi slot covers
- LDO z-Motors with 420mm lead screws (no POM nuts)
- all screws
- rubber feet
- Techflex cable tuning
- Nylon filament for cable management
- GT2 belt
- 2 GT16 toothless pulleys
- cable extensions

Black extrusions are HFS, Grey extrusions are GFS type

Print height is 320mm.

Please note when you use a Rambo board we highly recommend to add our MOSFET kit as well. The plug connected to the RAMBO can melt and even damage the board.

The 10mm option contains: 3x LMU10, 2x LMUW10, 2x PSFU10-360mm (y-axis) rods , 2x PSFU10-422mm rods (z-axis)

Printed parts ara avaialbel for MK3 Rel 3 only. Printed with 35% infill, 0.2mm layer. Total weight 1.2kg, printime approx. 100h.

Dimensions: Height: 55cm, Width: 40cm, Depth: 46cm

23 Items

Specific References

16 other products in the same category: