Replacement heat sink for the Mosquito™ or Mosquito Magnum™ hotends from Slice Engineering
PLA Extrafill "Green Grass"
PLA, 1.75mm, 750g spool
Fillamentum PLA Extrafill is a material for the FFF (also known as FDM) 3D printing technology.
The advantage of this material is that it can be used in 3D printers easily, that it allows a high quality of printing even in tricky details and an excellent lamination of the printed object.
PLA filament is made of natural ingredients and can be biodegraded by composting. It complies with the requirements for food contact.
Fillamentum guarantees high precision of filament dimensions within the tolerance of +/- 0,05 mm, which is strictly controlled throughout the production.
Printing filaments reported on the marked under the trademark Fillamentum are produced in a wide variety of colours in accordance with the colour charts RAL and Pantone, and also in own unique colour ranges.
|Diameter tolerance:||+/- 0,05 mm|
|Working temperature:||190 - 210 °C|
|Weight:||750 g of filament (+ 250 g spool)|
- The length of PLA filaments (1.75 mm, 750 g) is 255 m
You can buy our materials on these spool types:
16 other products in the same category:
Cleaning kit for extruder and hot end
Lead screw integrated z-axis motor for Zaribo 220 or stock Prusa MK2(S), MK3. Teflon coated
Prusa MK2 MK3 Compatible. 2 Motors
GATES PowerGrip® GT3 1830-2MGT3-6
PLA, 1.75mm, 750g spool
A pack of 3 high-temperature non-stick silicone socks for E3D HotEnds. Keep your heater block clean and well-insulated with a cosy blue sock, stylishly emblazoned with the E3D logo.
Complete motor kit for MMU2. 3 motors.
LCD cable, cable length 60cm.
Set of 2 cables.
AC-DC Single Output Enclosed power supply; Output 24VDC Single Output at 13.4A; PFC; forced air cooling; 1U low profile
Extrudr PETG 1.1kg, 1.75mm
Pack contains 1.5m red and 1.5m black 14AWG cable.
Length is sufficient for wiring PSU to Einsy or Rambo box on Zaribo frame.
Black aluminium Extrusions by Misumi for Zaribo 220, 320, 420
Print height 320mm
Prusa MK2 -> Zaribo MK2
Prusa MK2.5(s) -> Zaribo 2.5(s)
Prusa MK3(s) -> Zaribo MK3(s)
Printed parts only available for MK3 Rel. 3. STLs for MK2, MK2.5 are available on github.
224X254 0.20mm Thick PEI sheet for Prusa MK2/S with 468P 3M Adhesive on Glossy side
Lead screw integrated z-axis motor for Zaribo 220 or stock Prusa MK2(S), MK3.
Pluggable terminal block. 15A, 30...12AWG