Zaribo PETG by Das Filament

Filament of Zaribo printers.

• Material: PETG (polyethylene terephthalate glycol)
• Temperature resistance up to approx. 90 ° C
• Low shrinkage
• Good possibility for reworking e.g. grinding or drilling
• odorless
• Quantity: 800 g wound on plastic spool (gross weight: 1050g)
• Diameter of 1.75 mm and 2.85 mm available and therefore compatible with all major 3D printer models
• Constant diameter (+ -0.05 mm)
• Coil dimensions: Outside: Ø 200 mm; Mount: Ø 52 mm; Width: 55 mm
• The pressure temperature should be between 210-240 ° C. May vary depending on the printer model and settings
• Color: translucent neon green (fluorescent). Transparent. Will quickly become opaque with increasing layer thickness.