Fuse for Einsy Rambo, Einsy Retro, Rambo
Extrudr BioFusion quicksilver
0.8 kg Spool
Extrudr BioFusion is a new breed of excellent material, best suited for designers and makers who are looking for an extra shiny appearance of their printed parts. Besides the good and special looks, BioFusion is also stronger than standard PLA or PETG, so you can also use it for mechanical parts. The temperature resistance of the material is up to 75°C. As it is very easy to print and doesn’t require a heated bed or closed building chamber, not much experience is needed to get extraordinary results. Shine on!
- Super shiny look
- Good mechanical properties
- Temperature resistance up to 75°C
- Good Layeradhesion
- 100 % recycleable
16 other products in the same category:
Synthetic grease 3oz, 1 tube
These rods are for Zaribo printers. Hardened steel cut with precision by Misumi Engineers in the factory.
Dowel Pin 2.9mm x 14mm for x-idler
Power switch with light, CE, VDE
This is the "universal" Zaribo screw for upgrading or full build.
These rods are for Original Prusa MK series printers. Hardened steel cut with precision by Misumi Engineers in the factory.
Print height 320mm
Prusa MK2 -> Zaribo MK2
Prusa MK2.5(s) -> Zaribo 2.5(s)
Prusa MK3(s) -> Zaribo MK3(s)
Printed parts only available for MK3 Rel. 3. STLs for MK2, MK2.5 are available on github.
Powerful hammering with surface protection
Misumi corner brackets (black) for x-y frame and top z-axis
TwinClad XT coated nozzle
Available from Sep. 15th
GreenTEC PRO black 0.8kg, 1.75mm
242X260 0.20mm Thick PEI sheet for Prusa MK3 Spring Steel Sheet with 468P 3M Adhesive on Glossy side
PINDA1 is a proximity sensor probe.