Extrudr BioFusion Blue Fire
0.8 kg Spool
Extrudr BioFusion is a new breed of excellent material, best suited for designers and makers who are looking for an extra shiny appearance of their printed parts. Besides the good and special looks, BioFusion is also stronger than standard PLA or PETG, so you can also use it for mechanical parts. The temperature resistance of the material is up to 75°C. As it is very easy to print and doesn’t require a heated bed or closed building chamber, not much experience is needed to get extraordinary results. Shine on!
- Super shiny look
- Good mechanical properties
- Temperature resistance up to 75°C
- Good Layeradhesion
- 100 % recycleable
16 other products in the same category:
A pack of 3 new and improved high temperature non-stick silicone socks for E3D HotEnds. Keep your heater block clean and well-insulated with a cosy blue sock, stylishly emblazoned with the E3D logo.
PLA, 1.75mm, 750g spool
LM8UU Linear Bearings by Misumi / THK
Geared Extruder Motor
Dowel Pin 2.9mm x 14mm for x-idler
Extrudr PETG 1.1kg, 1.75mm
Hardened Steel Tips – 200 mm long
High performing thermistor
LMU10 Linear Bearings by Misumi
0.8 kg Spool
5V - NF-A4x10 FLX is a highly optimised, premium quality quiet fan in 40x10mm size.