Stepper Motor Kit Zaribo 420
Reference:
- Write a review
$147.00
2x motors with 520 lead screws, 3x motors for x,y,e. All motors by LDO.
Security Policy
Delivery Policy
Return Policy
Full kit of high-quality stepper motors Zaribo 420.
1.8 degree step angle,
Nema17 40mm Stepper 1.0A
420mm Tr8*8 Lead Screw
2mm pitch 4 starts
Durable and silent POM Nut
Comes with connecting cable.
The kit contains 5 motors (x,y axis, extruder, 2x z axis)
2x stepper motors, 600mm cable length
1x cooler extruder motor, 600mm cable length
1x stepper motor with integrated lead screw 520mm, 1000mm cable length + POM nut
1x stepper motor with integrated lead screw 520mm, 400mm cable length + POM nut
9 Items
Specific References
2x motors with 520 lead screws, 3x motors for x,y,e. All motors by LDO.
16 other products in the same category:
Mosquito 24V 50W Heater
$25.54
Price
● 50W heater cartridge
● 50W heater cartridge
● 50W heater cartridge
Prusa MK2, MK2.5(s), MK3(s)...
$368.92
Price
Print height 420mm
Prusa MK2 -> Zaribo MK2
Prusa MK2.5(s) -> Zaribo 2.5(s)
Prusa MK3(s) -> Zaribo MK3(s)
Printed parts only available for MK3 Rel. 3. STLs for MK2, MK2.5 are available on github.
SlicE Heat Break Insulator
$36.27
Price
Replacement heat break insulator for the Mosquito Magnum™ hotend from Slice Engineering.
Carriage for Heated Bed MK52
$39.16
Price
Carriage for heated bed MK52. 6mm Aluminium, black coated. CNC drilled holes.
Compatible with Zaribo MK3, Prusa MK3- Works with MK52 24V bed only.
Fan extension / spitter cable
$3.97
Price
Cable can be used to extend 3 pin fan cable or needed for Zaribo MK 2.5 or Prusa MK 2.5 to connect Noctua to RAMBO board.
Thermistor Cartridge
$7.89
Price
A custom made thermistor encapsulated into an easy to use cartridge packag
Mosquito Magnum
$198.08
Price
The Mosquito Magnum prints up to 20% faster than any other hotend on the market A thermal insulator protects the extended melt zone from the effects of active cooling, and radiative heat loss. It has a heat transmission rate as low as 3 W/m*K, meaning you can have ultimate confidence in the speed of your print, while at the same time maintaining the high resolution benefits achieved with the standard Mosquito The melt zone is extended proximally upwards to maintain a small form factor A multi extrusion setup with both high flow and high resolution optimized designs can be created without needing to purchase new nozzles or make carriage modifications to accommodate hotends of different sizes