PSFU Original Prusa MK3/MK2/S 8mm Smooth Rod Kit by Misumi
These rods are for Original Prusa MK series printers. Hardened steel cut with high precision by Misumi Engineers in the factory. Tolerance: h5
These high quality smooth rods are cut by Misumi Engineers with lathe precision and they are heat treated hardened steel which should last for ultra long time in a 3d print environment. You can install both on MK3 and MK2/S.
2 PSFU8-370 Hard Chrome Precision Linear Shaft - Straight 370mm (x) 2 PSFU8-330 Hard Chrome Precision Linear Shaft - Straight 330mm (y) 2 PSFU8-320 Hard Chrome Precision Linear Shaft - Straight 320mm (z)
Tolerance diameter: h5 (0 -0.006mm )
16 other products in the same category:
PLA, 1.75mm, 750g spool
Powerful hammering with surface protection
High performing thermistor
New motor design. Extruder Motor stays much cooler during printing.
Replacement Heat Break for Mosquito Magnum™ hotends from Slice Engineering.
0.8 kg Spool
T-handle screwdriver external hexagon long
Extrudr PETG 1.1kg, 1.75mm
224X254 0.20mm Thick PEI sheet for Prusa MK2/S with 468P 3M Adhesive on Glossy side
Pack contains 1.5m red and 1.5m black 14AWG cable.
Length is sufficient for wiring PSU to Einsy or Rambo box on Zaribo frame.
12v NF-A4x10 FLX is a highly optimised, premium quality quiet fan in 40x10mm size. This version is 12V it's NOT compatible with MK3. It's compatible with MK2, MK2.5!
Carriage for heated bed MK52. 6mm Aluminium, black coated. CNC drilled holes.
Compatible with Zaribo MK3, Prusa MK3- Works with MK52 24V bed only.