LDO Pancake Extruder Motor
Zaribo 220 and 320 to Zaribo 420 Upgrade Kit
This kit allows two different upgrade options:
Zaribo 220 MK3 > Zaribo 420 MK3
Zaribo 320 MK3 > Zaribo 420 MK3
Print height is 420mm.
2x z-Motors 530mm lead screw from LDO
2x 522mm PSFJ smooth rods from Misumi
2x 530mm aluminium extrusion (black)
extension cables for fans, filament sensor, and PINDA2
Techflex tube 12.4mm diameter
Nylon filament to support cable
16 other products in the same category:
Extends the motor cable. 20cm length.
Power switch with light, CE, VDE
PINDA1 is a proximity sensor probe.
Cable can be used to extend PINDA 2 cable or needed for Zaribo MK 2.5 or Prusa MK 2.5 to connect PINDA 2 to RAMBO board.
crimped cables 60cm, 2 pairs (black and red)
1m high quality PFTE tube for Bowden tubing. Not recommended inside the extruder.
Please allow up to 10 days before shipping when you order plastic parts.
This kit allows many different upgrade options:
Prusa MK2 -> Zaribo MK2
Prusa MK2.5 -> Zaribo 2.5
Prusa MK3 -> Zaribo MK3
Print height is 220mm.
Please note when you use a Rambo board we highly recommend to add our MOSFET kit as well. The plug connected to the RAMBO can melt and even damage the board.
Fuse for Einsy Rambo, Einsy Retro, Rambo
Zaribo MK2 -> Zaribo MK 2.5 upgrade kit. Compatible with Prusa MK2 -> Prusa MK2.5
Lead screw integrated z-axis motor for Zaribo 220 or stock Prusa MK2(S), MK3.
242X260 0.20mm Thick PEI sheet for Prusa MK3 Spring Steel Sheet with 468P 3M Adhesive on Glossy side
PINDA 2 probe is a proximity sensor with a special thermistor embedded inside.