LMU8 Linear Bearings by Misumi
Misumi Rods for Prusa MK2(S) / MK3
These rods are for Original Prusa MK series printers. Hardened steel cut with precision by Misumi Engineers in the factory.
Package contains 2 rods of the desired length.
|2||PSFJ8-xxx||Hard Chrome Precision Linear Shaft - Straight xxx mm|
For Prusa MK2(S) / MK3 x and y axis you need
|2||PSFJ8-370||Hard Chrome Precision Linear Shaft - Straight 370mm (x)|
|2||PSFJ8-330||Hard Chrome Precision Linear Shaft - Straight 330mm (y)|
For Prusa MK2(S) / MK3 z axis you need
|2||PSFJ8-320||Hard Chrome Precision Linear Shaft - Straight 320mm (z)|
Tolerance diameter: g6 (-0.005 - -0.014mm)
16 other products in the same category:
224X254 0.20mm Thick PEI sheet for Prusa MK2/S with 468P 3M Adhesive on Glossy side
Upgrade kit for MK2.5 MK3 (NO drive gear included)
Please allow up to 10 days for assembly.
Assembled Zaribo 220 MK3s Rel 3
Thumbscrew for Bondtech extruder
GreenTEC PRO black 0.8kg, 1.75mm
High quality Kraftform Plus screwdriver
Pleas allow up to 10 days for plastic parts.
Kit version: contains all parts to build the Zaribo 420 MK3s Rel 3, plastic parts are optional
Print height 420mm
Prusa MK2 -> Zaribo MK2
Prusa MK2.5(s) -> Zaribo 2.5(s)
Prusa MK3(s) -> Zaribo MK3(s)
Printed parts only available for MK3 Rel. 3. STLs for MK2, MK2.5 are available on github.
Cable can be used to extend PINDA 2 cable or needed for Zaribo MK 2.5 or Prusa MK 2.5 to connect PINDA 2 to RAMBO board.
Misumi endcaps for 3030 extrusions (black)
Contains 6 caps
Full kit of high quality stepper motors Zaribo 320. All motors by LDO.
PLA, 1.75mm, 750g spool